 |
 |
 |
|
The horizon 6 flex FA centrifuge features a fully digital display and 10 programmable cycles for flexible fixed angle processing in the routine lab. Easily save and select your custom time, RPM, and g-force settings, or choose from three (3) carefully formulated presets. The LED lid lighting prevents forgotten samples and indicates when the centrifuge is ready, running, or done. Process all blood and urine tubes of 125 mm/15 mL or less, right out of the box. The fixed angle rotor and tube holders included in the unbeatable price.
Easy to use: Program and recall 10 cycles on the horizon 6 flex FA through the digital display. Set and lock your three preferred cycles on the horizon 6 FA through the simple two-button controls. Both spin 75-100 mm (3-10 mL) tubes in the same holder without cushions, or 125 mm (15 mL) tubes in the included additional tube holders.
Easy to Monitor: Process samples more efficiently with horizon’s LED lid lighting: off when the centrifuge is ready to load, on when running, and flashing at the end of cycle.
Built to Last: No routine maintenance. Brushless motor, engineered composite components.
Engineered for Safety: Protect your lab with imbalance detection and a shatterproof lid which can only be opened when the rotor is stopped, even if the unit loses power.
A great value: Unbeatable quality for any budget. Each horizon centrifuge is ready to run with fixed angle rotor, universal 75-100 mm (3-10 mL) tube holders, 125 mm (15 mL) tube holders included in the affordable price.
Features and Benefits
- Monitor time remaining on the digital display
- Program up to 10 custom time and speed settings
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
- Capacity: Up to six (6) tubes
- Tube sizes: 75, 100, or 125 mm (3-15 mL)
- Fixed angle rotor: Separate specimens at a fixed angle of 45 degrees
- Fully programmable: Save and recall 10 easily customizable cycle settings, or choose from three presets for chemistry, coag, and urine
- Set and lock controls: Switch between preset cycles, or lock to a single cycle with the easy-to-use two-button interface
- Intuitive lid lighting: Lid lights are off when the centrifuge is ready, on when running, and flashing when done
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Brushless DC motor: Years of operation with no routine maintenance
- Clear shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
- Quiet operation: Enjoy a sound level of just 64 dBA
- Regulatory approvals: Certified to US, Canadian, and European Safety regulations and standards
Technical Specifications
- Sound Level: 64 dBA
- Dimensions:
- Height: 9" (23 cm)
- Width: 12" (30 cm)
- Depth: 14" (36 cm)
- Weight: 12 lbs. (5.4 kg)
- Sound level: 64 dBA
- Max. acceleration time: 20 Seconds
- Max. deceleration time: 20 Seconds
- Factory setting range: 1 to 30 Minutes (± 1%)
- Voltage: 95 to 253 VAC
- Frequency: 50/60 Hz
- Max. Power Requirements: 220 Watts
- Centrifuge Motor: 1/2 H.P. Brushless DC
- Max Speed: 3,900 RPM
- Capacity: 6 x 75-125 mm (3-15 mL)
- Preset Cycles:
- 3,900 RPM | 10 minutes | 1,600 xg (3-10 mL) or 1,850 xg (15 mL)
- 3,800 RPM | 15 minutes | 1,500 xg (3-10 mL)
- 2,200 RPM | 5 minutes | 500 xg (3-10 mL) or 600 xg (15 mL)
Warranty Information
|
|
|
 |
|
 |
|
Skip to content
