 |
 |
 |
|
The Dash Flex 24 centrifuge is built to meet the needs of large, high-volume STAT labs. Prevent forgotten samples and reduce turnaround time with LED lid lighting (patent pending). Bright lights indicate when the centrifuge is ready, running, or done, even in the noisiest labs. The clear, bright digital display shows a countdown timer when the centrifuge is running. With a small footprint, it fits easily in accessioning, and its 24-tube capacity allows it to be loaded and run more quickly, further driving down TAT. Use the simple controls to adjust time, speed and more on the fly. Or choose from one of three common STAT presets, program up to 10 of your validated settings, or lock to a single cycle for maximum repeatability.
Easy to monitor: LED lid lighting indicates when the centrifuge is ready (off), running (on), or done (fashing), reducing forgotten samples and keeping your average TAT down. The digital display shows cycle parameters and time remaining.
Easy to use: Set and save up to 10 programmable time, speed, and g-force settings using the user-friendly interface. The DASH Flex 24 arrives pre-programmed with the most common STAT settings and can spin 75-100 mm (up to 50 mL) tubes with the same rotor and universal tube holders.
Eliminate wait time: The Dash Flex 24 is so compact that it can be used in an array in accessioning. The array will allow spinning samples as soon as they arrive, further shortening your TAT. For a more compact unit, consider the 6-tube Dash Apex 6.
Safe and durable: Enjoy years of worry-free operation with the Dash’s brushless motor and rugged, reinforced carbon fber components. Enhance lab safety with imbalance protection and a clear, shatterproof lid, which locks until the
centrifuge has stopped completely.
A great value: Each centrifuge comes fully equipped and ready to run with a horizontal rotor, universal tube holders included in the affordable price. 2-Stage horizontal rotor: The Dash Flex 24’s patented swing-out horizontal rotor design incorporates a unique test tube holder that produces the ideal horizontally separated samples. 
- Monitor time remaining on the digital display
- Program up to 10 custom time and speed settings
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
- Capacity: Up to twenty-four (24) tubes
- Tube Sizes: 3 mL to 10 mL: up to 17 mm x 75: 100 mm; 50 mL and 15 mL
- Digital display: Clearly see your custom parameters and the time left in each cycle
- Fully programmable: Easily set and save up to 10 custom time, RPM, and g-force settings
- LED lid lighting: Lid lights flash at the end of each cycle and continue flashing until the lid is opened.
- Brushless DC motor: Years of operation with no routine maintenance
- 2-Stage horizontal rotor: Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Positive lid latching: Firm mechanical latching of the lid prevents the escape of debris
- Clear Shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
- Regulatory approvals: Certified to US, Canadian, and European Safety regulations and standards
Technical Specifications
- Dimensions:
- Height: 9" (23 cm)
- Width: 14.5" (37 cm)
- Depth: 17" (43 cm)
- Weight: 39 lbs. (17 kg)
- Sound level: 64 dBA
- Max. Acceleration Time: 45 Seconds
- Max. Deceleration Time: 40 Seconds
- Factory Setting Range: 1 to 30 Minutes (± 1%)
- Voltage: 95 to 253 VAC
- Frequency: 50/60 Hz
- Max. Power Requirements: 280 Watts
- Centrifuge Motor: 1/2 H.P. Brushless DC
- Preset cycles:
- 4,200 RPM | 5 minutes | 3,000 xg
- 4,200 RPM | 6 minutes | 3,000 xg
- 3,500 RPM | 7 minutes | 2,000 xg
- Capacity: 24 x 75-100 mm (up to 6 x 50 mL)
Warranty Information
|
|
|
 |
|
 |
|
Skip to content
