 |
 |
 |
|
The Horizon 6 FA routine centrifuge meets fixed angle processing needs for PRP, urine, and more at an affordable price. Set and lock to your lab’s preferred settings with the simple, two-button interface, or choose from three preset cycles for the most common laboratory needs. The illuminated lid lighting displays the centrifuge’s status at a quick glance and indicates if it is ready to run, running, or done. Horizon 6 FA spins all blood and urine tubes up to 15 mL/125 mm and is equipped with everything needed to run, including rotor and tube holders.
Easy to use: Program and recall 10 cycles on the horizon 6 Flex FA through the digital display. Set and lock your three preferred cycles on the horizon 6 FA through the simple two-button controls. Both spin 75-100 mm (3-10 mL) tubes in the same holder without cushions, or 125 mm (15 mL) tubes in the included additional tube holders.
Easy to monitor: Process samples more efficiently with horizon’s LED lid lighting: off when the centrifuge is ready to load, on when running, and flashing at the end of cycle.
Built to last: No routine maintenance. Brushless motor, engineered composite components.
Engineered for safety: Protect your lab with imbalance detection and a shatterproof lid which can only be opened when the rotor is stopped, even if the unit loses power.
A great value: Unbeatable quality for any budget. Each horizon centrifuge is ready to run with fixed angle rotor, universal 75-100 mm (3-10 mL) tube holders, 125 mm (15 mL) tube holders included in the affordable price.
Features and Benefits
- 3 cycles preset for routine lab needs
- "Set and lock" controls to one setting
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
- Capacity: Up to six (6) tubes
- Tube sizes: 75, 100, or 125 mm (3-15 mL)
- Fixed angle rotor: Separate specimens at a fixed angle of 45 degrees
- Factory presets: Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU
- Set and lock controls: Switch between preset cycles, or lock to a single cycle with the easy-to-use two-button interface
- Intuitive lid lighting: Lid lights are off when the centrifuge is ready, on when running, and flashing when done
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Brushless DC motor: Years of operation with no routine maintenance
- Clear shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
- Quiet operation: Enjoy a sound level of just 64 dBA
- Regulatory approvals: Certified to US, Canadian, and European Safety regulations and standards
Technical Specifications
- Sound Level: 64 dBA
- Dimensions:
- Height: 9" (23 cm)
- Width: 12" (30 cm)
- Depth: 14" (36 cm)
- Weight: 12 lbs. (5.4 kg)
- Max. Acceleration Time: 20 Seconds
- Max. Deceleration Time: 20 Seconds
- Factory Setting Range: 1 to 30 Minutes (± 1%)
- Voltage: 95 to 253 VAC
- Frequency: 50/60 Hz
- Max. Power Requirements: 220 Watts
- Centrifuge Motor: 1/2 H.P. Brushless DC
- Max Speed: 3,900 RPM
- Preset Cycles:
- 3,900 RPM | 10 minutes | 1,600 xg (3-10 mL) or 1,850 xg (15 mL)
- 3,800 RPM | 15 minutes | 1,500 xg (3-10 mL)
- 2,200 RPM | 5 minutes | 500 xg (3-10 mL) or 600 xg (15 mL)
- Capacity: 6 x 75-125 mm (3-15 mL)
Warranty Information
|
|
|
 |
|
 |
|
Skip to content
