 |
 |
 |
|
The Dash Flex 12 STAT centrifuge goes the extra mile to shorten turnaround time. Green lid lights are visible from across the lab and indicate when the unit is done (flashing), still running (on) or ready (off), reducing the chance that specimens are left waiting or forgotten. 10 cycles can be programmed in memory for acceleration, deceleration, speed, g-force, and runtime, and are shown on the digital display, along with the time remaining in the cycle.
Easy to monitor: LED lid lighting indicates when the centrifuge is ready (off), running (on), or done (flashing), reducing forgotten samples and keeping your average TAT down. The Dash Flex 12’s digital display shows cycle parameters and time remaining.
Easy to use: Program up to 10 custom time, RPM, and g-force settings with the DASH Flex 12. Or, set and lock your three preferred cycles using the DASH Apex 12’s two-button interface. Both arrive pre-programmed with the most common STAT settings and can spin 75-100 mm (3-10 mL) tubes with the same rotor and universal tube holders.
Eliminate wait time: DASH centrifuges are so compact that they can be used in an array in accessioning. The array will allow spinning samples as soon as they arrive, further shortening your TAT. For a more compact unit, consider the 6 tube capacity DASH Apex 6.
Safe and durable: Enjoy years of worry-free operation with the DASH’s brushless motor and rugged, reinforced carbon fiber components. Enhance lab safety with imbalance protection and a clear, shatterproof lid, which locks until the centrifuge has stopped completely.
A great value: Each DASH centrifuge comes fully equipped and ready to run with a horizontal rotor, universal tube holders included in the affordable price.
Features and Benefits
- Monitor time remaining on the digital display
- Program up to 10 custom time and speed settings
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
- Capacity: Up to twelve (12) tubes
- Tube Sizes: Up to 75-100 mm (3-10 mL)
- Digital display: Clearly see your custom parameters and the time left in each cycle
- Fully programmable: Easily set and save up to 10 custom time, RPM, and g-force settings
- LED lid lighting: Lid lights flash at the end of each cycle and continue flashing until the lid is opened
- 2-Stage horizontal rotor: Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Brushless DC motor: Years of operation with no routine maintenance
- Clear shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
- Regulatory approvals: Certified to US, Canadian, and European Safety regulations and standards
Technical Specifications
- Dimensions:
- Height: 9" (23 cm)
- Width: 13" (32 cm)
- Depth: 15". (38 cm)
- Weight: 30 lbs. (13.7 kg)
- Sound level: 61 dBA
- Max. acceleration time: 35 Seconds
- Max. deceleration time: 40 Seconds
- Factory setting range: 1 to 30 Minutes (± 1%)
- Voltage: 95 to 253 VAC
- Frequency: 50/60 Hz
- Max. power requirements: 230 Watts
- Centrifuge motor: 1/2 H.P. Brushless DC
- Preset cycles:
- 5,200 RPM | 3 minutes | 4,000 xg
- 5,200 RPM | 5 minutes | 4,000 xg
- 3,600 RPM | 7 minutes | 2,000 xg
- Capacity: 12 x 75-100 mm (3-10 mL)
Warranty Information
|
|
|
 |
|
 |
|
Skip to content
