The plusoptiX A16 stationary binocular autorefractor is made for babies, children and uncooperative patients that measure the refraction of both eyes (binocular) from one meter distance within one second.

• Designed for a stationary use (optimal room settings and device can’t get misplaced)
• Displays camera picture and measurement results on an external DVI monitor (eases communication with parents)
• Internal patient database for up to 100,000 entries for follow-up management and studies
• Can be connected to a DHCP network server using a LAN or WLAN connection for CSV data exchange (EMR) and measurement report printing
• Binocular readings with simultaneous measurement of both eyes
• Measurement from 1m (3.3 feet) distance to the child
• Measurement in less than one second
• Children can be measured starting at 6 months of age
• Measurement is delegable and can easily be performed by an ophthalmic technician
• Optional external printer available
• Monocular readings (e.g. in strabismic or aphacic patients)
• Can also be used in cycloplegia under certain conditions

• A16 Stationary Binocular Autorefractor
• Power Cord
• User Manual

• Dimensions: 9" x 6 5/8" x 11"
• Weight: 3 lbs
• Power Supply
• Input: 100 to 240 VAC (50 to 60 Hz), 0.8 A
• Output: 12 VDC, 2.5A
• Touchscreen operation: Diagonal 4.3‘‘, aspect ratio 5:3 (800 x 480 pixels) Resistive contact sensor
• Measurements
• Metered Value: Measurement range and tolerance
• Sphere: -7 to +5 dpt in 0,25 dpt increments ± 0,25 dpt
• Cylinder: -7 to +5 dpt in 0,25 dpt increments ± 0,25 dpt
• Axis: 1 to 180° in 1° increments ± 15°
• Spherical Equivalent: -7 to +5 dpt in 0,25 dpt increments ± 0,25 dpt
• Pupil Diameter: 3 to 8 mm in 0,1 mm increments ± 10%
• Gaze Asymmetry: in 0,1° increments ± 5°
• Inter Pupillary: distance in 0,1 mm increments ± 10%
• Interface Standards:
  • Interfaces: USB, DVI, IR, WLAN, LAN (RJ-45)
  • Standards:
  • IR: Plusoptix devices use infrared light with a wavelength of 870nm and a maximum intensity of 135mW/sr
  • WLAN Interface Standards
    • Physical Layer Supports 802.11 b and g standards
    • Network Architecture Types: Communication with cabled networks via access points
    • Security: WPA and WPA2
    • Transmit Power: 802.11b/g: 50 mW (+17 dBm) typically
    • Frequency Range: 2,400 - 2,4897 GHz
    • Operating Channels:
      • 1-11 for North America and other
      • 1-13 for Europe and other
    • Channels: Supports all channels of 802.11d-APs
  • RX sensitivity
    • 86 dBm typically @ 11 Mbps,
    • 82 dBm @ 6 Mbps,
    • 69 dBm @ 54 Mbps
  • Data Rates:
    • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
    • 802.11b: 1, 2, 5.5, 11 Mbps

Sample Screenshots

• 1-Year Warranty