|
|
|
|
Expanding upon the features of the TMX425 Treadmill, the TMX428 offers significant performance improvements to stand out as one of the top stress-testing treadmills on the market. The 22" (56 cm) running belt is the widest in the industry, which provides confidence to the user. MasterTrack is a patented v-guide on the underside of the running belt, which matches grooves in the running deck and rollers. This prevents any lateral movement of the belt and eliminates belt alignment issues. In addition, the deck is mounted on shock absorbing isolators to minimize impact stress.
The TMX428CP adds a controller for manual and programmable features.
Features and Benefits
Treadmill Features
-
Smooth, quiet, zero start AC inverter drive.
-
Smooth, quiet linear actuator elevation system.
-
Low profile, cushioned deck (standard) for patient comfort and safety.
-
22" wide running belt instills user confidence.
-
Patented MasterTrack belt alignment system eliminates off-center running belts.
-
Exceptionally accurate, self-calibrating speed and elevation.
-
Prominent emergency stop button.
-
Minimum maintenance.
Optional Controller Features
- Can be operated in diagnostic mode (interfaced with a stress computer) or non-interfaced, independent mode.
- Manual controller includes a large, bright display which shows Speed, Pace, Elapsed Time, Elevation, Distance, Calories, METS, Heart Rate and Target Heart Rate (user defined). Calculations are determined by ACSM formulas based on user weight, age and gender.
- Programmable controller utilizes a display which will prompt the user to enter required data and will graphically display progress in the mode selected. If fitness or user defined modes are selected, elevation and speed can be adjusted when in use; the stress protocols cannot be adjusted.
Technical Specifications
- Step-up Height: 7.0" from floor
- Running Deck Area: 22" x 63"
- Running Deck: Cushioned and reversible, self lubricating
- Running Belt: Anti-static, 2-ply Polyester with PVC textured surface
- Belt Tracking: Self aligning with adjustable rear roller
- Floor Space Requirement: 33” x 78.5”
- Construction: All steel chassis
- Cosmetic Finish: Powder coat subdued white with charcoal gray handrails
- Emergency Stop Button: Right hand or Left hand Estop
- Emergency Tether: Standard – opposite of Estop
- User Weight Capacity: 500 Lbs.
- Treadmill Net Weight: 425 Lbs.
- Communication Port: RS232 and USB 1.0
- Drive Motor: 4HP continuous (6HP peak) PWM DC brushless servo, improved torque at all speeds.
- Power Requirements (dedicated): 110-120V, 50/60Hz, 20 amp - 208-240V, 50/60Hz, 15 amp
- No-slip elevated belt (at test end): Belt locks 45 secs. when stopped
- Drive Belt: Self adjusting
- Elevation Motor: Linear Actuator with metal gears
- Speed: .5-12 MPH, .1-15 MPH (On CP)
- Speed and Elevation Calibration: Self calibrating
- Elevation: 0-25%
Warranty Information
Documentation Brochure
|
|
|
|
|
|
Accessories for this product... |
|
|
|