Home > Radiology > Tissue Simulation & Phantom > Ultrasound >

Pro-Project Pro-CT AAPM Phantom
Pro-Project Pro-CT AAPM Phantom


 
Additional Views:


Note: This item has a 3-10 week lead time.
Our Price: $3,094.00


Product Code: 03-103

Accessories

Geometry Insert (04-503) [Add $458.00]

Triple Low Contrast Insert (04-504) [Add $598.00]

 
Details
 

The Pro-CT AAPM phantom may be used for carrying out tests of computed tomography systems according to Report no. 1 of the AAPM (American Association of Physicists in Medicine).

Features and Benefits

  • PMMA water tank:
    • Inside cylinder diameter: 214 mm
    • Outside cylinder diameter: 220 mm
    • Lid has quick disconnect valves for ease of filling and draining
    • Aluminum alignment pin (6.3mm Ř x 76mm) or a polystyrene TLD insert (for dose measurements) can be attached to the lid
  • Low contrast section:
    • Placed at one end of the water tank
    • 12 fillable cavities 40 mm deep
    • Two pieces of each cavity with diameters: 25.4, 19.0, 12.7, 9.5, 6.4 and 3.2 mm
    • Spaced twice their diameter apart from the center line
    • Cavities can be easily filled from the outside with dextrose or sodium chloride solutions of various concentrations
  • Bone Insert
    • PTFE annulus
    • Wall thickness 6.4 mm, 70 mm long
    • Fits over all inserts to harden the beam
  • CT number linearity insert
    • Five 25 mm rods
    • Material: polyethylene, PMMA (acrylic), polycarbonate, polystyrene and nylon
    • Density values (g/cm3): 0.95, 1.19, 1.20, 1.05 and 1.1 respectively
  • Resolution
    • Eight sets / rows of air thru holes (five holes per set)
    • Diameters of holes: 1.75, 1.5, 1.25, 1.00, 0.75, 0.61, 0.50 and 0.40 mm
    • Distance between each hole is equal to the hole diameter
    • Distance between rows 5 mm
    • 0.2 mm stainless steel wire positioned longitudinally for calculation of line-spread function
  • Slice Thickness
    • Three Aluminum Strips: 0.5 mm thick and 25 mm wide angled at 45°, positioned at the center and aligned vertically
  • Optional Geometry Test Available
    • Contains two pairs of aluminium wire ramps whose slope angle tangent is equal to 0.5
    • Middles of ramps intersect on the same plane allowing for very precise evaluation of the slice location.
    • Contains two sets of four PMMA rods (Ř 10 mm) placed in vertexes of two squares (sides 100mm long)
  • Optional Triple Low Contrast Insert Available
    • Contains three groups of low-contrast objects. In each group, there are rods of the same density, 20 mm in height and with a diameter ranging from 2 to 15 mm. Density difference between groups and surrounding material is exactly 0.3%, 0.6% i 1.0%
    • Made of PMMA
  • Filling Tubes
  • Included heavy duty carrying case

Warranty Information

  • 1-Year Warranty

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Radiology > Tissue Simulation & Phantom > Ultrasound