 |
 |
 |
|
This product has been discontinued. Click here to return to Vital Signs Monitors. Replacing the VS800, the Mindray DPM3 is a compact, easy-to-use vital signs monitor designed to satisfy your basic monitoring needs. Suitable across adult, pediatric and neonatal patient populations, DPM3 is well-adapted for any department where quick, reliable physiological measurements are required. And since it is surprisingly affordable, you can consider DPM3 for any area of the facility in which vital signs may be needed - whether on a regular or sporadic basis.
Equipped with lithium ion battery technology that provides over 10 hours of continuous run time, this powerful little monitor can keep up with you on even your busiest shifts. It’s robust, lightweight design features a convenient built-in carrying handle and mounting options for wall, IV pole, rolling stand, or bed rail. DPM3 is ready to serve as your everyday vital signs sidekick.
Note: Mindray accessory kit sold separately, but is necessary for proper function of the unit. If needed, please ensure that the accessory kit option is checked before purchasing.
Features and Benefits
Weighing less than 8 lbs., its lightweight design provides a highly mobile vital signs solutionSmart, stable design anchors DPM3 firmly in place when activating buttons, keeping your other hand free to perform other tasksChoose from predictive or monitor temperature measurement modes depending on your clinical needsOptional parameters include Masimo SET® SpO2 and temperatureSizable, bright LEDs provide optimal visibility, whether across the bed or across the room3.4" high resolution LCD for display of plethysmograph, trended parameter data, alarm events and menusWith SmarTemp™ integrated temperature, perform predictive oral, axillary and rectal measurements in less than 12 seconds from calibrationData storage of up to 100 unique patient IDs and 1,200 sets of data for each parameter. Plus, all data is transferable to a PC for complete review and printing.Built-in recorder comes standard for printing of real-time and historical dataAutomatically admit patients using the optional bar code scanner. The process is quick and efficient, and can aid in minimizing risk of common transcription errors
Accessory Kit
- 3.5m NIBP Hose
- Reusable Adult Cuff
- Lithium Ion battery
- Mindray SpO2 Kit (Mindray Reusable Adult Finger Sensor
and Mindray 6 pin SpO2 cable) - SmarTempOral/Auxiliary probe kit (Includes: SmarTemp
probe, sheath and 20 probe covers)
Standard Features- Non-invasive blood pressure
- Lithium ion battery
- SpO2
- Pulse rate
- Recorder
Materials Included
Operators manualLine Cord (US)1 roll of paper
Optional Features
Rolling StandWall Mount Data CD
Technical Specifications
Display - Type: 3.4" monochrome FSTN LCD
- Resolution: 320 x 160 pixels
- Pitch: 0.24mm x 0.24mm
- Waveforms: Plethysmograph
- Parameters: 7-segment LEDs for non-invasive blood pressure (systolic, diastolic, mean), SpO2, pulse rate, temperature
Non-Invasive Blood Pressure- Measurement Method: Oscillometric
- Measurement Modes: Manual, interval, stat
- Connector Type: Rectus
- Units of Measure: mmHg, kPa (user-selectable)
- Resolution: 1mmHg
- Systolic Range:
- Adult: 40-270mmHg
- Pediatric: 40-200mmHg
- Neonate: 40-135mmHg
- Diastolic Range:
- Adult: 10-210mmHg
- Pediatric: 10-150mmHg
- Neonate: 10-100mmHg
- Mean Range:
- Adult: 20-230mmHg
- Pediatric: 20-165mmHg
- Neonate: 20-110mmHg
- Accuracy: Mean error is < ±5mmHg
- Standard deviation is < 8mmHg
- Cuff Deflation Technique: Step bleed
- Cuff Inflation: Volume of 500cc to 300mmHg in <20sec
- Over Pressure Protection: Double safety protection (hardware and software)
- Pulse Rate Range: 40-240bpm
- Pulse Rate Accuracy: ±3bpm
Pulse Oximetry- Measurement Range: 0-100%
- Resolution: 1%
- Accuracy:
- ±2% (70-100%, Adult/Pediatric, no motion)
- ±3% (70-100%, Neonate, no motion)
- 0-69% unspecified
Pulse Rate - Measurement Range: 20-254bpm
- Resolution: 1bpm
- Accuracy: ±3bpm (no motion)
Temperature- Modes: Monitor, predictive
- Measurement Range:
- Monitor mode: 25°C to 44°C (77°F to 111.2°F)
- Predictive mode: 35°C to 43°C (95°F to 109.4°F)
- Resolution: 0.1ºC
- Accuracy:
- Monitor mode:
- 25°C to 32°C (77°F to 89.6°F) ±0.2°C (±0.3°F) including 32°C (89.6°F)
- 32°C to 44°C (89.6°F to 111.2°F) ±0.1°C (±0.2°F) excluding 32°C (89.6°F)
- Measurement Time: Monitor: <60sec
- Predictive: <20sec
Trends- List Trends: 1,200 data sets stored. Data set includes measurement date/time, NIBP, SpO2, pulse rate, and temperature. Five data sets viewable in list trend window at a time.
Recorder- Type: Thermal array
- Output: Plethysmograph, list trend data
- Speed: 25mm/sec, 50mm/sec
Battery- Type: Rechargeable lithium ion or sealed lead acid
- Run Time: Lithium ion: 10.3 hours using a new, fully charged battery for continuous SpO2 and auto NIBP measurements at 15-minute intervals at 25°C
- Sealed lead acid: 4.3 hours using a new, fully charged battery for continuous SpO2 and auto NIBP measurements at 15-minute intervals at 25°C
- Recharge Time: 8 hours maximum (during normal operation or standby mode)
Interfacing- Connectors:
- 1 nurse call port for connecting to hospital nurse call system
- 1 RS-232 port for connecting bar code scanner
- 1 RJ45 port for patient data export or software upgrade via a PC
Dimensions- Monitor Size:
- 24cm (H) x 17cm (W) x 17cm (D)
- 9.4" (H) x 6.7" (W) x 6.7" (D)
- Monitor Weight: 3.5kg (7.7lbs) including battery
Environmental - Operating Temperature: 0°C to 40°C (SmarTemp™: 10°C to 40°C)
- Storage Temperature: -20°C to 60°C
- Operating Humidity: 15% to 95%, non-condensing
- Storage Humidity: 10% to 95%, non-condensing
Power Requirements- AC Voltage: 100–240 VAC, 50/60 Hz
- Power: 70VA
Safety- Type of Protection: Class I; internally/externally powered equipment
- Degree of Protection: CF
- Protection Against Ingress of Fluids: IPX0
Warranty Information
Documentation
|
|
|
 |
|
 |
|
Skip to content
