 |
 |
 |
|
The horizon 6 flex routine centrifuge is completely customizable to suit your lab’s needs. The fully digital display makes it easy to set cycle parameters on the fly, including variable run time, speed control, and deceleration. Lid lights flash at the end of each cycle and visually indicate the centrifuge’s status (off when ready, on when running, and flashing when done) from across the room, no matter the noise level. Spin 75-100 mm (3-10 mL) tubes right out of the box. Horizon 6 Flex arrives ready-to-run without the purchase of any additional accessories.
Easy to use: The fully digital display makes it easy to customize cycle parameters on the fly, or set and select one of the 10 programmable cycles. Spin 75-100 mm (3-10 mL) tubes without switching tube holders or adding cushions.
Easy to monitor: Process samples more efficiently with horizon’s LED lid lighting: off when the centrifuge is ready to load, on when running, and flashing at the end of cycle. Once the unit is started, the display shows remaining spin time.
Built to Last: No routine maintenance. Brushless motor, engineered composite components.
Engineered for Safety: Protect your lab with imbalance detection and a shatterproof lid which can only be opened when the rotor is stopped, even if the unit loses power
A Great Value: Unbeatable quality for any budget. Each horizon centrifuge is ready to run with horizontal rotor, universal tube holders included in the affordable price.
Features and Benefits
- Monitor time remaining on the digital display
- Program up to 10 custom time and speed settings
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
- Capacity: Up to six (6) tubes
- Tube sizes: 3 mL to 10 mL: up to 17 mm x 75: 100 mm
- Fully programmable: Save and recall 10 easily customizable cycle settings, or choose from three presets for chemistry, coag, and urine
- 2-Stage horizontal rotor: Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Intuitive lid lighting: Lid lights flash at the end of each cycle and continue flashing until the lid is opened
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Clear shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
- Brushless DC motor: Years of operation with no routine maintenance
- Quiet operation: Enjoy a sound level of just 64 dBA
- Regulatory approvals: Certified to US, Canadian, and European Safety regulations and standards
Technical Specifications
- Sound Level: 64 dBA
- Dimensions:
- Height: 9" (23 cm)
- Width: 12" (30 cm)
- Depth: 14" (36 cm)
- Weight: 12 lbs. (5.4 kg)
- Sound level: 64 dBA
- Max. acceleration time: 20 Seconds
- Max. deceleration time: 20 Seconds
- Factory setting range: 1 to 30 Minutes (± 1%)
- Voltage: 95 to 253 VAC
- Frequency: 50/60 Hz
- Max. power requirements: 220 Watts
- Centrifuge motor: 1/2 H.P. Brushless DC
- Max speed: 3,800 RPM
- Preset Cycles:
- 3,600 RPM | 10 minutes | 1,800 xg
- 3,300 RPM | 15 minutes | 1,500 xg
- 1,900 RPM | 5 minutes | 500 xg
- Capacity: 6 x 75-100 mm (3-10 mL)
Warranty Information
|
|
|
 |
|
 |
|
Skip to content
