 |
The plusoptiX A12C mobile binocular autorefractor is made for babies, children and uncooperative patients that measure the refraction of both eyes (binocular) from one meter distance within one second.
Features and Benefits - Designed to be used between multiple exam rooms in one office location and/or various locations
- Runs on rechargeable, standard AA size batteries
- Saves measurement reports to SD cart
- Displays camera picture and measurement results on an external DVI monitor (eases communication with parents)
- Internal patient database for up to 100,000 entries for follow-up management and studies
- Can be connected to a DHCP network server using a LAN or WLAN connection for CSV data exchange (EMR) and measurement report printing
- Binocular readings with simultaneous measurement of both eyes
- Measurement from 1m (3.3 feet) distance to the child
- Measurement in less than one second
- Children can be measured starting at 6 months of age
- Measurement is delegable and can easily be performed by an ophthalmic technician
- Optional external printer available
- Monocular readings (e.g. in strabismic or aphacic patients)
- Can also be used in cycloplegia under certain conditions
Materials Included - A12C Mobile Binocular Autorefractor
- (1) SD Card
- (6) AA Rechargeable Batteries
- (1) Power Adapter
- (1) Power Cord
- User Manual
Note: Onsite training is available.
Technical Specifications- Dimensions: 9" x 6 5/8" x 11"
- Weight: 2.2 lbs
- Power Supply
- Input: 100 to 240 VAC (50 to 60 Hz), 0.8 A
- Output: 12 VDC, 2.5A
- Touchscreen operation: Diagonal 5.7‘‘, aspect ratio 4:3 (640 x 480 pixels); Capacitive contact sensor
- Measurements
- Metered Value: Measurement range and tolerance
- Sphere: -7 to +5 dpt in 0,25 dpt increments ± 0,25 dpt
- Cylinder: -7 to +5 dpt in 0,25 dpt increments ± 0,25 dpt
- Axis: 1 to 180° in 1° increments ± 15°
- Spherical Equivalent: -7 to +5 dpt in 0,25 dpt increments ± 0,25 dpt
- Pupil Diameter: 3 to 8 mm in 0,1 mm increments ± 10%
- Gaze Asymmetry: in 0,1° increments ± 5°
- Inter Pupillary: distance in 0,1 mm increments ± 10%
- Interface Standards:
- Interfaces: USB, DVI, IR, WLAN, LAN (RJ-45)
- Standards:
- IR: Plusoptix devices use infrared light with a wavelength of 870nm and a maximum intensity of 135mW/sr
- WLAN Interface Standards
- Physical Layer Supports 802.11 b and g standards
- Network Architecture Types: Communication with cabled networks via access points
- Security: WPA and WPA2
- Transmit Power: 802.11b/g: 50 mW (+17 dBm) typically
- Frequency Range: 2,400 - 2,4897 GHz
- Operating Channels:
- 1-11 for North America and other
- 1-13 for Europe and other
- Channels: Supports all channels of 802.11d-APs
- RX sensitivity
- 86 dBm typically @ 11 Mbps,
- 82 dBm @ 6 Mbps,
- 69 dBm @ 54 Mbps
- Data Rates:
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b: 1, 2, 5.5, 11 Mbps
Sample Screenshots
|
|
|
Skip to content
