Nonin WristOx2™, Model 3150 Wrist-Worn Pulse Oximeter (USB Connection)

Featuring Nonin PureSAT® SpO2 technology, the WristOx2 3150 USB delivers fast, accurate oxygen saturation and pulse rate readings in challenging conditions, including low perfusion and motion. The WristOx2 3150 USB is compatible with a wide range of Nonin PureLight® sensors and provides continuous, reliable SpO2 monitoring and data recording. Applications include overnight oximetry studies at home, in the hospital, and in sleep labs.

Features and Benefits

Pulmonary Rehab - Advanced features such as 6 Minute Walk Test (6MWT) or overnight oximetry reporting available.
Overnight Reporting - Available when used with optional Nonin nVISION® data management software
Homecare Use - For overnight sleep apnea screening or oxygen qualification screening directed by a clinician
Versatility and Ease of Use - Ideal for applications where small, portable oximetry is needed and Bluetooth® connectivity is not essential
Compact Design - Small size wears like a watch, with large display screen and enhanced sensor connector design
Enhanced Memory - 1,080 hours of non-volatile memory at a four-second sampling rate with additional high resolution variable sampling options of one or two seconds
PureSAT Technology - Pulse-by-pulse averaging algorithm that is able to adjust with the patient’s condition for precision accuracy.
Data Verification - Memory Volume Indicator (MVI) Mode provides a graphic display in hours and minutes, verifying that a sufficient amount of data has been recorded during oxygen qualification testing
Secure Data Transfer - Data can be transferred securely to optional nVISION® software via USB connection
Long Battery Life - Operates for 48 hours on two AAA batteries
Exclusive Sensors - WristOx2 sensors are designed exclusively for use with WristOx2 3150 oximeters

Optional nVISION Data Management Software Features

Combining the WristOx with NONIN’s nVISION® Data Management Software will unleash the full power of your wrist oximeter. nVISION is a Windows®-based software application which provides data analysis and report generation when used with NONIN’s memory products. Purchase nVISION with your WristOx and enjoy advanced features such as:

Sensor Activation Mode (sensor connect/disconnect turns WristOx On/Off)
Programmed Mode (for pre-programming up to 3 separate Start/Stop times)
Set Date, Time and Patient ID
Set Patient Data Storage Rate (for choosing trend resolution)
Choose a Full or Partial Display (turns off SpO2 and Pulse Rate display for anxious patients)
Access 33 Hours of Stored Data (for sleep studies or ambulatory monitoring)
Clear Memory

Materials Included

Standard Accessories

2 AAA Alkaline Batteries
Resuable wristband
Medium Soft Reusable Sensor
Carrying Case
Operator's Manual

Optional Starter Kit

Standard accessories
Pack of 3 reusable wrist bands
Carrying Case
USB download cable
nVISION software on CD

Note: Whith this optional adapter, you can use these disposable or reusable sensors

Features and Benefits

Oxygen Saturation Display Range: 0% to 100% SpO2
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Displays
- Numeric: 3-digit LCD
- Pulse Strength: Pulse Strength Bar Graph
Accuracy – Sensors: Declared accuracy data for compatible sensors can be found in Nonin’s Sensor Accuracy document.
Measurement Wavelengths and Output Power
- Red: 660 nanometers @ 0.8 mW maximum average
- Infrared: 910 nanometers @ 1.2 mW maximum average
Temperature
- Operating: -5 °C to 40 °C (23 °F to 104 °F)
- Storage/Transportation: -40 °C to 70 °C (40 °F to 158 °F)
- Time (from storage) for monitor to be ready for its intended use: 10 minutes to warm from -40 °C to -5 °C; 10 minutes to cool from 70 °C to 40 °C
- Device temperature will not exceed 41°C as measured during a controlled environment test.
Humidity
- Operating: 10% to 95% non-condensing
- Storage/Transportation: 10% to 95% non-condensing
Operating Altitude: Up to 4,000 meters (13,123 feet)
Operating Hyperbaric Pressure: Up to 4 atmospheres
Power Requirements: Two AAA (1.5V) batteries
Battery Life (expected minimum)
- Storage: MVI Display Mode off/MVI Display Mode on:
  - Alkaline AAA: 9 months/25 days
  - Rechargeable AAA (700 mAh): Not specified
  - Rechargeable AAA (1050 mAh): Not specified
- Operating without Bluetooth Connection, continuous use:
  - Alkaline AAA: 53 hours
  - Rechargeable AAA (700 mAh): 36 hours
  - Rechargeable AAA (1050 mAh): 52 hours
- Operating with Bluetooth Connection, continuous use:
  - Alkaline AAA: 44 hours
  - Rechargeable AAA (700 mAh): 24 hours
  - Rechargeable AAA (1050 mAh): 31 hours
Dimensions (without sensor or wristband)
- Width: 2.9"
- Height: 2"
- Depth: 0.75"
Weight (with batteries and wristband): 70.0 g (2.5 oz)
Memory
- Type: Non-volatile
- Capacity
  - up to 1,080 hours (4 sec. data storage rate)
  - up to 540 hours (2 sec. data storage rate)
  - up to 270 hours (1 sec. data storage rate)
Classification per ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1
- Type of Protection: Internally powered (battery power)
- Degree of Protection: Type BF-Applied Part
- Mode of Operation: Continuous
- Enclosure Degree of Ingress Protection: IP33

Warranty Information

3-year warranty

Documentation
Brochure
Sleep Study Literature
Ambulatory Flyer

Sample Report

information

machine model

currency display

language display