|
Designed with emergency and operating room medical responders in mind, the VI-8080P patient monitor provides the efficient and fast-acting response needed for medical emergencies. Minimum ECG waveform and HR distortions during electrosurgical cutting and ablation, and total protection from electrosurgical interference prevent technical interference.
Features and Benefits
- 8” LCD high resolution display
Resistance to high electromagnetic power and is protected against defibrillation effects
- Large font display for distant visibility
- User friendly operating user interface with feature rich popup menus, dialogue boxes
and rotary mouse.
- Digital SpO2 technology offers anti-motion and anti-low perfusion functions, comes with standard Venni SpO2; optional Nellcor SpO2 technology available.
- Unique one-screen all-lead ECG display, which can facilitate the diagnosis and analysis
of cardiac disease.
- Audio and visual comprehensive alarm with configurable vital sign limit settings.
- 168 hours tabular and graphic trends & data storage
- Capable of printing vital signs data, EKG charts, waveforms with optional built-in
thermal recorder.
- EtCO2 socket made ready. EtCO2 measurement is a plug-n-play with optional
Respironics sidestream/mainstream CO2 sensor module.
- Drug concentration calculation, ST-segment detection, pace-maker analysis and
arrhythmia analysis.
- Available with 3-lead of 5-lead ECG Cable.
- Optional printing function for data, waveforms, trend tables and trend graphs.
- Optional CO2 detection function.
Standard Components
- Standard ECG
- HR
- Respiration (Dual Mode w/ T-Resp)
- SpO2 (Pulse Reading & PLETH Waveform)
- NIBP
- 2-Ch Temperature (T1, T2)
- Basic Aarrhythmia
- Built-in rechargeable battery
Materials Included
- (1) 3-lead (or 5-lead) EKG cable (6 Pin)
- (1) Pack of electrodes (10pcs)
- (1) Blood pressure cuff (Adult 25-35 cm)
- (1) Blood pressure extension hose (10’)
- (1) Skin temperature sensor
- (1) Adult SpO2 finger sensor
- (1) Grounding Cable with Clamp
- (1)Power supply cable (125V 10A)
- (1) User’s operation manual
- Built-in thermal printer w/ (1) roll of paper (Optional)
Technical Specifications
ECG
- ECG Input: 3- or 5-lead
- EKG Lead: I, II, III, aVR, aVL, aVF, V
- Gain Choice: AUTO, 0.25x, 0.5x, 1.0x, 2.0x, 4.0x
- Scanning Speed (mm/sec): 12.5mm/s, 25mm/s, 50mm/s
- Heart Rate Range:
- 3- or 5-lead EKG module – 10-350 bpm
- Frequency Response:
- 3- or 5-lead EKG module – MON 0.5-40Hz, OPS 1-25Hz
- Heart Rate Accuracy: ±1%
NIBP
- Measurement Method: Automatic Oscillometry
- Patient Types: Adults/Pediatrics/Neonate
- Measurement Parameters: Systolic, Mean, Diastolic
- Measurement Range: 10-270mmHg
- Units of Measurement: mmHg/Kpa
- Accuracy:
- Static - ±2% or ±3 mmHg, whichever is greater
- Clinical - ±5 mmHg average error, 8 mmHg standard deviation
Pulse Rate/SpO2
- Display: Digital and PLETH waveform
- Measurement Range: 0-100%
- Resolution: 1%
- Pulse Rate Range: 25-250BPM
- Accuracy: ±1%
- Resolution: 1BPM
Temperature
- Measurement range: 25.0–45.0°C
- Accuracy: ±0.1°C
- Unit: Celsius (°C), Fahrenheit (şF)
Respiration
- Measurement Method: Impedance variation between RA-LL (R-F)
- Measurement Range: 0-120BPM Accuracy: ±1BPM
- Resolution: 1RPM
CO2 (Optional)
- Measurement Type: Sidestream/Mainstream
- Measurement Range: 0%-10.0%
- Accuracy: ±2mmHg
Power Requirements
Standard Configuration
- EKG/Heart Rate/Respiration (3-lead or 5-lead), NIBP, SpO2/Pulse Rate, Temperature,
EtCO2 sensor socket ready, Lithium Battery.
Optional Configuration
- Built-in thermal recorder, EtCO2 module (Respirnoics EtCO2 LoFlo Sidestream or
Capnostat 5 Mainstream), 2-channel IBP, Nellcor SpO2
Warranty Information
|
|
|