Home > Eye and Face Wash Fountains >

OK-IIE Lab Opti-Klens Face and Eyewash with Eliminator Valve
OK-IIE Lab Opti-Klens Face and Eyewash with Eliminator Valve


 




Product Code: 429622
Discontinued

Details
 

Due to part shortages, this product is currently unavailable.

Chrome-plated, solid brass face & eyewash unit is designed to fit laboratory gooseneck faucets as a permanent face wash & eyewash fountain with unlimited water supply in an emergency. In operation, unit mounts to the spout with two spray nozzles curving upwards with a 15 degree greater angle then the standard OK-II model. In an emergency, it frees both hands to hold eyes open to the flow of water. Delivering more than 3 gallons of water per minute, it does so at a reasonable height. No plumbing required. Two of the most common adapters are packed with the unit.

The addition of the Eliminator Valve allows water temperature to be pre-set at the faucet and remain on. For sink use, the water flow is activated by the use of the push through plunger on the Eliminator Valve. Push the plunger to the opposite side for water flow.

Warranty Information
  • 1-Year Warranty

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Eye and Face Wash Fountains