The evolution of Passport® Monitoring has arrived – Mindray’s ePM 12M monitor is the inspired result of cutting-edge innovation and exceptional efficiency, continuing the Passport legacy in monitoring. Experience the immediate and measurable benefits of the smartphone-like user interface that delivers 90% of all common monitoring functions with just 2 gestures. A single swipe enables clinicians to see patient data in large numerics mode then swipe again, and a mini-trend window provides an immediate view of critical patient data, smoothing workflow at point-of-care.

Features and Benefits

• 12" multi-gesture, capacitive touchscreen displays, featuring intuitive user interface
• 10 waveforms
• Integrated parameters include 3/5-lead ECG, Masimo SET® SpO2, NIBP, respiration, temperature
• Arrhythmia analysis with atrial fibrillation (Afib) detection standard
• Extensive data storage capability for trend data, alarms, events, and 48 hours of full disclosure
• Integrated HL7 and DIAP communication protocol for interface to EMR
• Parameter list tile with automatic highlight of abnormal readings
• One touch to drag icon tab right and instantly view mini-trend screen or set baseline vitals at the start of a patient case
• Manufactured with industry-leading plastics that stand up to the most stringent medical grade cleaners
• IP44 rated, resistant to damage often caused by continuous cleaning and usage
• Expanding extension rack supports plug-and-play parameter modules
• The concealed grab-and-go handle eliminates hard to clean crevices and eases clinical workflow while on the move
• Dual IBP connection is included
• Optional CO2 Sidestream and Microstream available
• Optional multi-gas module available

Materials Included

• ePM 12M Patient Monitor
• (1) Lithium Ion Battery
• (1) Adult Reusable Cuff
• (1) 3.5m NIBP hose
• (1) Power Cord
• (1) Paper Roll
• (1) ECG Trunk Cable
• (1) 3-Lead Adult/Pediatric Snap Wire Set
• (1) Masimo Adult Reusable Sensor
• (1) Masimo Sensor Cable
• (1) Temperature Probe Adapter Cable
• User Manual

Technical Specifications

• Weight: 10.6 lbs
• Size: 10.6" x 9.9" x 6.3"
• Power Requirements
  • Line Voltage: 100 to 240 VAC (±10 %)
  • Maximum Current: 2.0 A
  • Frequency: 50/60 Hz (±3 Hz)
  • Battery: Rechargeable lithium-ion battery, 4500mAh ≥ 4 hours run time
• Environmental Requirements
  • Temperature
    • Operating
      • 0 to 40 °C (without AG and CO2 module)
      • 10 to 40 °C (with AG and CO2 module)
    • Storage: -20 to 60 °C
  • Humidity
    • Operating: 15 to 95 % (non condensing)
    • Storage: 10 to 95 % (non condensing)
  • Barometric
    • Operating: 427.5 to 805.5 mmHg (57.0 to 107.4 kPa without AG and CO2 module)
    • Storage: 120 to 805.5 mmHg (16.0 to 107.4 kPa without AG and CO2 module)
• Interfacing
  • Main Unit
    • AC power connector (1)
    • VGA port (1)
    • USB 2.0 connector (2)
    • Analog output/nurse call/defib. Sync/Serial Port (1)
    • Integrated module rack (1), for 2 slots
• Barcode Scanner: Supports 1D and 2D barcode (Barcode is not included)
• Thermal Recorder: 3 traces (paper 50 mm width, 20 m length)
• Network Printer: Support

Warranty Information

• 3-Year Warranty