Home > Biomedical >

EST-2 Electrical Safety Tester
EST-2 Electrical Safety Tester


 





Product Code: EST-2

Accessories

US 220V Line Cord (EST82510) [Add $35.00]

Banana-Alligator Black Test Lead (EST1166-60-0) [Add $30.00]

Universal Outlet Adapter (EST30250) [Add $75.00]

North American 220V Outlet (EST5469-XHGO) [Add $75.00]

Carry Case (ESTCAR) [Add $90.00]

Discontinued  
Details
 
This product has been discontinued. For a comparable product, click here for the Basic Electrical Safety Analyzer

The EST-2 Electrical Safety Tester is designed for testing the electrical safety of any electrical device including medical equipment with patient leads. It can be used to verify manufacturer’s specifications, to periodically maintain equipment safety and performance, and to verify the condition of a product following production.

The wide power input range allows use of the unit on 110 or 220 volt systems without modification. The power outlet can be replaced by the user to adapt to any available outlet. Universal adapter outlets are available.

Measurements include Line Voltage, Device Current, Leakage Current, and Resistance. Normal and Reverse Polarity, Open Neutral or Open Ground conditions are easily simulated without the need for additional equipment or wiring.
Leads leakage measurements may be made in all of the above conditions for 12 patient leads. In addition, the EST-2’s Outlet Tester verifies the wiring of the outlet.

Features and Benefits
  • Resettable 20 AMP Fuse
  • Leads Leakage Testing
  • Outlet Tester
  • Quick & Easy Power Outlet Replacement
  • Large, Easy To Read Display
  • 85-264 Vac Input Range
  • Over Voltage Protected Power Input
  • Selectable AAMI or IEC Test Loads
  • Multiple Power Outlet Options
  • Portable & Lightweight
  • Line Voltage & Leakage Current
  • Load Current Measurement
  • Normal and Reverse Polarity Test
  • Open Neutral & Open Ground Test
  • Half Kelvin Earth Resistance Measurement
Materials Included
  • US 110V Line Cord
  • Kelvin Test Lead
  • Banana-Alligator Red Test Lead
  • User Manual
  • Lead Adapter Set
Technical Specifications

Input Power
  • Voltage: 85 to 264 Volts AC
  • Frequency: 47 to 440 Hz
  • Mains current (NO LOAD): 0.30 Amps
  • Current Rating: 20 Amps
Line Voltage Test
  • Range: 85 to 264 Volts AC
  • Accuracy: +/- 2 %+1 Digit
  • Resolution: 1 Volt
Load Current Test
  • Range: 0.00 to 19.99 Amps (RMS)
  • Accuracy: +/- 2 %+1 Digit
  • Resolution: 10 Milliamps
Leakage Current and Lead Test
  • Measurement Type: True RMS
  • Range: 0 to 1999 Microamps
  • Accuracy:
    • 0.1%+1digit (DC to 10 Hz)
    • 1%+1digit (10Hz to 1KHz)
  • Resolution: 1 Microamp
  • Input Impedance:
    • 1000 Ohms per
    • IEC601-1,
    • AAMIESI-1993
  • Test Load: IEC601-1 and AAMI (User Selectable)
Earth Resistance Test
  • Measurement Type: 3 Point Half Kelvin
  • Range: 0 to 1999 Milliohms
  • Accuracy: 1% +1 digit
  • Resolution: 0.001 Ohms (1 Milliohms)
  • Current Source: 1 Amps pulse
Physical Specs
  • Dimensions: 6.9" W x 5.1" D x 3.0 H"
  • Weight: 2.5 lb

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Biomedical
Biomedical > Electrical Safety Analyzers