MedicalDeviceDepot.com

• Easy-to-read 12.1" active color TFT display.
• Easy to learn, easy to use with simplified menus and dedicated function keys.
• Mini-Trends can display condensed tabular vital signs data to show recent monitoring activities.
• Cardio-Respirogram Trend Display.
• Optional invasive cardiac output interface capability.
• Compatible with Criticare's 8500 Series Agent Gas Analyzer for anesthetic monitoring.
  

• Number of Leads: 3- or 5-Lead
• Lead View: User-selectable; I, II, III, aVR, aVL, aVF, V (5-Lead); I, II, or III (3-Lead)
• Gain Selection: x0.5, x1, x2, and x4
• Frequency Response: Diagnostic: 0.05 to 100 Hz (-3dB);
• Monitor: 0.5 to 40 Hz (-3dB);
• ST: 0.05 to 40 Hz (-3dB)
• Electrosurgery Protection: Yes
• Defibrillator Protection: Yes
• Pacer Detection/Rejection: Yes
• ST Accuracy: ±0.2 mm or ±5% of reading, whichever is greater, over heart range of 30 to 120 bpm
• ST Range: -6.0 to 6.0 mm

• Technique: Oscillometric measure upon inflation
• Measurement Cycle: < 40 sec. typical
• Auto. Measurement Cycles: 2, 3, 5, 10, 15, 30 min; 1, 2, 4 hr
• Max. Allowable Cuff Pressure: Adult/Pediatric: 300 mmHg; Neonate: 150 mmHg
• Range: Adult/Pediatric: 30-300 mmHg; Neonate: 20-150 mmHg
• Resolution: 1 mmHg
• Transducer Accuracy: ±2 mmHg or ±2% or reading, whichever is greater,
• over full range
• STAT Mode: 5 min of consecutive readings
• Clinical Accuracy: Complies with AAMI SP-10:2002

• Range: 1% to 99%
• Resolution: 1%
• Accuracy: 70% to 99% range: ±2%; 50% to 69% range: ±3%;
• < 50%: unspecified
• Method: Dual wavelength LED

• Source: User selectable: Smart, ECG, Pleth, NIBP, IBP
• Range: 20 to 300 bpm (ECG, Pleth);
• 30-240 bpm (NIBP); 30-300 bpm (IBP)
• Accuracy: ±1 bpm or ±1% (ECG) whichever is greater

• Channels: 2
• Range, Accuracy: 68° to 113°F (20° to 45°C): ±0.1°C
• Display Resolution: ±0.1°
• Probe: YSI-400 and YSI-700 Series

• Rate: 6 to 150 bpm (ECG); 2 to 120 bpm (CO2)
• Resolution: 1 bpm
• Accuracy: ±2 bpm or ±2%, whichever is greater
• Source: User selectable: Smart, CO2, ECG

• Units: mmHg; %; kPa; Torr.
• Method: Non-dispersive infrared; autocalibrating.
• N2O Compensation: Manual (On/Off).
• Range: 0–99 mmHg; 0–12.5%; 0–12.5 kPa; 0–99Torr.
• Resolution: 1 mmHg; 0.1%; 0.1 kPa; 1 Torr.
• Flow, Sample Rate: 200 ml/min.
• Accuracy: ±2 mmHg; ±0.3 vol. %; ±0.3 kPa; ±2 Torr or ±4% of reading, whichever is greater, at 200 ml/min & respiratory rate of ≤ 120 bpm.
• Rise Time: 170 ms (10–90%) at 200 ml/min.

• Channels: 1 or 3.
• Transducer Sites: Selectable: ART, PA, LV, RV, LA, RA, CVP, ICP.
• Pressure Range: -10 mmHg to 300 mmHg.
• Transducer: Freq. Response 0–20 Hz; Impedance >300 ohms;
• Sensitivity 5μV/V/mmHg.
• Accuracy: ±1 mmHg or ±1%, whichever is greater.

• Indication: Audible; Visual (EN 60601-1-8)
• Silence: Yes; 2 minutes or permanent.

• Memory: 24 hours at 30 second intervals.
• Display: Tabular, Graphical.

• Screen: 12.1” active color touch screen
• Waveforms: 6, maximum
• Waveform Types: ECG Leads I, II, III, aVR, aVL, aVF, V; CO2; Respiration; Pleth; IBP; breath-by-breath CO2; ST Histograms; Mini-Trends; OXY-CRG
• Sweep Speed: 6.25, 12.5, 25, or 50 mm/sec

• Keys: 10; membrane-activated.
• Rotary Knob: Push and rotate; 24 steps/turn.

• COM ports: Two RS232-compatible DB9 ports; USB (for software downloads only).
• Nurse Call: Contact switch; 3.5 mm stereo phone jack, 14 mm.
• Defib/Sync BNC connector.
• Video Port: Serial VGA compatible.
• DC Out: 5 VDC output for optional wireless accessory.
• External Module Port: 8-PIN circular connector.

• Type: Thermal line printer.
• Paper Speed: 12.5, 25 or 50 mm/sec.

• Weight: 12 lbs; 5.4 kg.
• Size: 12” (H) x 14.5” (W) x 11.5” (D);
• 30.5 cm (H) x 36.8 cm (W) x 29.2 cm (D)

• Voltage: 100 to 240 VAC; 50/60 Hz.
• Power Consumption: 35 W, typical.
• Battery: 1 sealed lead acid.
• Battery Life: 2 hours, typical (3 hours, typical for base unit).
• Recharge Time: 4 to 6 hours, typical.

• Operating Temperature: 32° to 104°F (0° to 40°C).
• Storage Temperature: 23° to 122°F (-5° to 50°C).
• Operating Humidity: 15% to 90%, noncondensing.
• Operating Altitude: -300 to 3,000 meters.

• Medical Device: Class II Equipment (IIb EU).
• Electrical Protection: Class I Equipment.
• Degree of Protection: Type CF, Defibrillator-proof.
• Protection Against Ingress: IPX1.
• Safety: EN 60601-1.

• Standard: ECG, Respiration, NIBP, HR, SPO2, Temperature, Arrhythmia and ST analysis, and Nurse Call interface connection.
• Optional: CO2, 1 or 3 channel IBP, printer.

• 2-year warranty.

CO2
Units: mmHg; Torr; %; kPa
Method: Non-dispersive infrared; autocalibrating
N2 O Compensation: Manual; On/Off
Range: 0 to 99mmHg; 0 to 99 Torr; 0 to 12.5%; 0 to 12.5 kPa
Resolution: 1mmHg; 1 Torr; 0.1%; 0.1 kPa
Sample Rate: 200 ml/min
Accuracy: +2mmHg, ±0.3 volume %, ±0.3 kPa, or ±2 Torr or ±4% of reading, whichever is greater, at 200ml/min and respiratory rate of <= 120bpm
Rise Time: 170ms (10 to 90%) at 200 ml/min

Invasive Blood Pressure
Channels: 1 or 3
Transducer Sites: Selectable; ART, PA, LA, RA, LV, RV, CVP, ICP
Pressure Range: -10mmHg to 300mmHg
Transducer: Sensitivity 5µV/V/mmHg; Freq. Response 0-200 Hz; Impedance >300 ohms
Accuracy: ±1mmHg or ±1%, whichever is greater
Scale Range: -10 to 10, 0 to20, 0 to 30, 0 to 40, 0 to 60, 0 to 100, 0 to 150, 0 to 200, 0 to 300

Alarms
Indication: Audible; visual (EN 60601-1-8)
Silence: Yes; 2 min or permanent

Trend Memory
Tabular: 24 hr at 30 sec intervals
Display: Tabular, Graphical

Display
Screen: 12.1" active color TFT
Resolution: 800 x 600 pixels
Waveforms: 6, maximum
Waveform Types: ECG Leads I, II, III, aVR, aVL, aVF, V; CO2, Respiration; Pleth; IBP; breath-by-breath CO2; ST Histograms; Mini-Trends; OXY-CRG 
Languages: English, French, German, Italian, Portuguese, Spanish, Russian

Controls
Keys: 10; membrane-activated
Rotary Knob: Push and rotate; 24 steps/turn

System Outputs
Com Ports: Two RS 232-compatible DB9 ports; USB (for software downloads only)
Nurse Call: Contact switch; 3.5mm stereo phone jack, standard 14mm length
Defib/Sync: BNC connector
Video Port: Serial VGA compatible
DC Out: 5 VDC for optional wireless accessory
External Module Port: 8-PIN circular connector

Recorder
Type: Thermal line printer
Paper Speed: 12.5, 25, 50mm/sec

Mechanical
Weight: Base unit without batteries: 12 lb; 5.4 kg
Size: Base unit: 12 in (H) x 14.5 in (W) x 11.5 in (D);
30.5 cm (H) x 36.5 cm (W) x 29.2 cm (D)

Power Requirements
Voltage: 100 to 240 VAC; 50/60 Hz
Consumption: 35 W, typical
Battery: 1 sealed lead acid
Battery Life: 2 hours with no external modules
Recharge Time: 4 to 6 hours, typical

Environmental
Operating Temperature: 32° to 104° F; 0° to 40° C
Storage Temperature: 23° to 122° F; -5° to 50° C
Operating Humidity: 15% to 90%, noncondensing

Classification
Types of Protection: Class I equipment
Degree of Protection: Type CF defib-proof
Safety: EN 60601-1