MedicalDeviceDepot.com

Criticare’s eQuality™ 506DN is the monitor for everyone. An affordable monitor with features for both spot check and continuous monitoring. The 506DN patient monitor with sturdy carry-handle attaches quickly to a rolling stand. It can operate on battery power or directly from AC power. It is lightweight and designed for ease of use as a mobile monitor. With a compact design, the 506DN patient monitor adapts readily to hospital, clinic and transport requirements.

Features and Benefits

• Proprietary ComfortCuff® NIBP measures on inflation for faster, more comfortable readings.
• Criticare DOX™ digital SpO2 technology with waveform display.
• Audible and visual alarms are adjustable for use in continuous monitoring.
• Large responsive keys for fast spot checking with an easy to clean membrane keypad.
• On-screen menu selection for ease of setup and use.
• Adult, pediatric and neonate settings for a complete range of patients.
• Nurse call and connectivity to network systems.
• Trend last 24 blood pressure measurements with heart rate and SpO2.
• Direct main (AC) power so no adapter is required.

Non-Invasive Blood Pressure

• Technique: Oscillometric measure upon inflation 
• Measurement Time: <40 seconds typical; 0 to 300mmHg; standard adult cuff 
• Automatic Measurement 
• Cycles: 1 - 60 minute; 2 - 4 hour; STAT 
• Inflation Pressure Range: 30 to 300mmHg (Adult) 
• 30 to 150mmHg (Pediatric) 
• 20 to 150mmHg (Neonate) 
• Resolution: 1mmHg 
• Clinical Accuracy: SP-10:2002 
• Transducer Accuracy: ±2mmHg or ±2% of reading, whichever is greater, over full range 
• STAT mode: 5 minutes of consecutive readings 

Pulse Oximetry

• Range: 1% to 99% 
• Resolution: 1% 
• Accuracy: 70% to 99% range: ±2%; 
• 50% to 69% range: ±3%;
• <50%: unspecified 
• Method: Dual wavelength LED
• Audio: Tone with each detected pulse; pitch varies with saturation 

Heart (Pulse) Rate

• Range: 20 to 300bpm 
• Accuracy: Greater of ±1bpm or ±1%, of reading 
• Unspecified for <30 or >240 bpm 
• Resolution: 1bpm Pulse 
• Volume: 10 levels or Off 

Alarms

• Indication: Audible; Visual 
• Volume: 10 levels or Off 
• Silence: Yes; 2 minutes or permanent 

Trend Memory

• Memory: Last 24 NIBP measurements 
• Parameters: Systolic, Diastolic, MAP, Pulse Rate (records SpO2 pulse rate and SpO2 saturation if oximtery is monitored) 
• Trend Span: 24 hours at 1 hour intervals 

Displays

• Type: Monochrome LCD 
• Parameters: NIBP, SpO2, pulse rate plethysmograph 
• Status: Alarm Silence; Sensor; Low Battery; External Power; 
• Patient Size 
• Languages: English and Spanish 

System Output

• Nurse Call: Contact switch; 3.5 mm phone jack 
• Com Port: Serial, RS 232-compatible 
• Settings: External printer or CUSP 
• Mechanical Weight: 4.5 lbs; 2 kg 
• Size: 8 in (H) x 5.5 in (W) x 5.75 in (D); 20.3 cm (H) x 14 cm (W) x 14.6 cm (D) 

Power Requirements

• Voltage: 100 to 240 VAC, 50 to 60 Hz 
• Battery: Rechargeable 
• Battery Life: 8 hours typical 
• Recharge Time: 6 hours 

Environmental

• Operating Temperature: 32º to 104º F; 0º to 40º C 
• Storage Temperature: –4º to 149º F; -–20º to 65º C 
• Operating Humidity: 5% to 95%, non-condensing Classification Type of Protection: Class I equipment 
• Degree of Protection: Type CF defibrillator-proof equipment 
• Protection against Ingress: IPX1 rating, Drip-Proof Equipment