MedicalDeviceDepot.com

The Model 130 has memory to retain oxygen saturation and pulse rate data, and can operate in three different modes to best suit your needs:

1. The Model 130 can retain up to 30 minutes of information for a single patient, making the device ideally suited for treadmill or other long-duration tests.
2. The Model 130 can also be used in walk-around tests, storing data for up to 20 consecutive patients, tagging each reading with a patient number, time, and date.
3. The Model 130 also includes expanded memory for sleep screening where data can be stored every 5 seconds for up to 11.5 hours. Data stored in any mode can be printed or quickly transferred by infrared to a personal computer..

This oximeter can be used with a wide variety of adult and pediatric sensors.  Opening the Integral Sensor for finger placement automatically turns on the device. The large red LED display alternates between oxygen saturation and pulse rate every few seconds.

• Intended for spot-check monitoring
• Fits into lab coat pocket
• Compact styling Multi-sensor versatility - choose from a built-in sensor or the cable adapter module and any sensor with a CompuShield® connector
• Advanced DSP technology
• 2-year warranty

Includes

• Integral finger sensor
• Manual
• 1 AA Battery
  

Specifications

Display	3-digit, 7-segment LED
Resolution	SpO2: 1% Pulse: 1 BPM
Range	SpO2: 20-100% Pulse: 25-250 BPM
Accuracy	SpO2: 100-70% ± 2% 69-60% ± 3% Less than 60% unspecified Pulse: 25 to 200 BPM ± 2 BPM or 2% (whichever is greater) Above 200 ± 3% SpO2 & Pulse: 8 secs. for 80% of the population

 
General

Dimensions	4.73 in L x 1.82 in W x 0.96 in H (12 cm L x 4.6 cm W x 2.46 cm H)
Weight	4.1 oz. (113 grams) with Cable Adapter 3.9 oz. (111 grams) with Integral Finger Sensor (weight includes battery)

 
Power Source

Battery Type	One 1.5 volt, AA-sized alkaline battery
Battery Life	Approximately 1200 spot checks (using Duracell® Ultra)